Posted this on another forum for those that visit both, but I thought I would try here too:
It seems obvious to me that the MotorCo would have an option for having both an accessory switched and not switched accessory power at the same time but as far as I can tell with the Rushmore bikes it is an either or but not both situation. Is there a Y splitter that attaches to the accessory power in the left panel to allow the use of both the 6920722 harness (unswitched accessory power) and 71400105 (accessory switched power)? I do not want or need my heated grips and heated seat switched on and off by the dash accessory switches but I do have a few other accessories I would like to be able to switch on and off via the panel switches. Am I missing something here? Is there a Y splitter available that is not listed in the P&A catalog?
Anyone ever find a solution to Ron's issue above?
My issue is the same as Ron's. Need switched and non-switched power.
2015 RGS here
I have my heated seat and power for my Garmin GPS (I use the Garmin on trips and built in boom when not) connected to the 8 prong accessory port under left side cover.
Just installed the HD Cool Flow Fan and that also plugs into the 8 pin accessory plug under left side cover.
I'm not worried about overloading circuit as I will never have heated seat and Cool Flow Fan on at the same time.
The Cool Flow Fan is switched to the switchpack by the Speedo.
I just want to keep it simple so would like to find a 8 pin Y adaptor so I can have switched and non-switched power.
