Road Glide banner

21 - 21 of 21 Posts

·
Registered
Joined
·
227 Posts
Discussion Starter #21
Update - installed Alpine rears that are rated at 100w RMS and the BT7P1 in the front which are rated at 120w RMS. I adjusted the amp, rear gain 0, front gain 25%, rear and front crossover at 80hz. with a flat EQ now I can get to 3/4 volume without clipping on the amp And depending on the song. But these speakers match the amp and now I can run the volume up without distortion and they both actually sound pretty darn good. And for less combined than one set of Focals. So I think I got this all figured out now, thanks
 
  • Like
Reactions: SetoSeyer
21 - 21 of 21 Posts
Top