Road Glide banner

1 - 3 of 3 Posts

·
Registered
Joined
·
26 Posts
looking for a stock height clearview preferable with vent, but at this point without vent will do.
I have a Clearview GT Medium in very light tint (looks clear) without a vent I took off my 2006 that I will sell. It has about 25,000 miles on it with normal wear for a shield of it's age. I did have the sides cut back some to allow clearance for the mirrors but it looks very nice, almost factory. Not sure if it is 'stock height' as you ask for but measures 19" from the top of the shield to the center mounting hole with the tape laying flat on the shield. The rubber molding will come with the shield but no well nuts. I am 6'1" with a 32" inseam and look over the shield by about 2-3".

I will take $40.00 plus shipping from 49093. There are a couple photos in my album with this shield for viewing or I can send better photos if you are interested.
 

·
Registered
Joined
·
8 Posts
ClearView

I have a Clearview GT With re-curve. Measures 14 1/2 from top to bottom. In excellent condition.

$50.00 + shipping from 03886
 
1 - 3 of 3 Posts
Top