Road Glide banner

T-Man 555 Torque Cams

4466 Views 13 Replies 8 Participants Last post by
I just had the T-Man 555 Torque cams installed in my 103. I'm hearing some valve train noise around 2500 RPM's. Is this normal with these cams?
1 - 1 of 14 Posts
After working almost exclusively with very quick-ramp cams from Bob Wood, since the mid-1990's and Jim Leineweber's grinds from well before that, along with a few of the big Red Shift cams, we've found that by loading the lifter to .140"-.150" will keep most very quiet even at full operating temps.
1 - 1 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.