[Buiceman]

Will Enforcer wheels from a 2014 fit a 2011 Ultra?

 

[wjco9]

Put them on my 12

 

[Buiceman]

Great. Thanks!

 

[Brando]

I'm about to install the same wheels on my 2010. The dealer stated that he wasn't 100% sure if the rear would fit but said it would just be a matter of using the correct sized shim or spacer. They haven't done this swap before so we'll see what "extra" parts they say I need to buy.
Getting them installed on Saturday. I'll follow up with the results although I don't forsee any.

 

[RockyMtnRG]

I'm thinking about doing this on my 2012 - does it matter if the bike I'm taking the Enforcer wheels and rotors from doesn't have ABS (mine does)? Thanks in advance.

 

[bless0]

I have a Front enforcer 19 "Wheel, tire, rotors and abs bearings with only 700 miles on it for sale. $525 plus shipping

 

[Pompey]

If they came from a bike with ABS, I would change out the bearings, thats the only thing

 

[RockyMtnRG]

Thanks for the quick replies guys.

Pompey, if both the '15 and my '12 have ABS, are you saying I'd need to replace the bearings or not replace them?

Bles0, I'll send you a pm.

 

[bless0]

My understanding is if you already had ABS the wheel from the '14 or '15 if they have ABS you should be fine. If the '12 didn't have ABS i think you could still use a '14 or '15 wheel with abs.

 

[Pompey]

My understanding is if you already had ABS the wheel from the '14 or '15 if they have ABS you should be fine. If the '12 didn't have ABS i think you could still use a '14 or '15 wheel with abs.

What he said, only need to change if you got the rims that had ABS & yours never. So If they came from a bike with ABS & you have ABS you are good to go

 

[RockyMtnRG]

That's what I needed to know - thanks very much guys!